 |
|||
 |
Windmill Cables |  |
|
|
|||
| EPR/HFXLEVA LSOH 0.6/1kV Torsion Resistant Power Cable |  |
|
|
Windmill Cables
Application
These cables are designed for special application condition in wind turbines, special for medium mechanical stress and for operation under permanent influence of seawater and usage outdoor.
Standards
IEC 60502
EN 50363
HD 22.13
Construction
Conductor: Stranded bare copper conductor.
Insulation: Extruded halogen free rubber compound EI8.
Screen: Tinned wire copper braid.
Sheath: Extruded halogen free EVA compound EM8.
Technical Data
Rated Voltage Uo/U (Um) |
0.6/1 kV |
Operating Temperatures |
flexing: -35℃~+90℃; fixed installation: -40℃~+90℃ |
Minimum Bending Radii |
fixed: 4×OD; flexing: 6×OD |
Torsion Application |
± 100 °/m |
Maximum Permissible Tensile Load |
15 N/mm² (in operation) |
Short-circuit Temperature |
250℃ |
Flame Retardant |
EN 50265-2-1 |
Halogen Free |
IEC 60754 |
Smoke Density |
IEC 61034 |
Oil Resistant |
Yes |
Ozone Resistant |
Yes |
Silicone Free |
Yes |
Dimensions and Weight
Construction |
Nominal Overall Diameter |
Nominal Weight |
No. of cores×mm² |
mm |
kg/km |
25×0.75 |
18.0 |
500 |
25×1 |
20.0 |
550 |
4×1.5 |
10.0 |
150 |
12×1.5 |
16.0 |
400 |
32×1.5 |
26.0 |
950 |
42×1.5 |
35.0 |
1700 |
12×2.5 |
23.0 |
620 |
5×2.5 |
15.0 |
300 |
4×4 |
13.5 |
300 |